Quick Break

Every once in a while, CHP or the police will run a traffic break. Sometimes you don't know why, but this time was to clear some debris off the freeway, a tie down strap that someone had lost.

Light traffic for a Monday morning. Things are slow on account of the Wuhan virus. I have some other things I've been thinking of posting regarding that, but for now, you get this.

Car Stuff

Some car stuff that's happened. First up, the previously mentioned radiator replacement on Jade. This was back in December, it started losing water pretty regularly. Gave it an inspection, and it had coolant ooze on the driver's side tank of the radiator between the transmission cooler lines, so I figured that was it.

Put a replacement in, and while I was doing that, discovered some damage to the bottom edge and the air conditioning condenser (as well as the radiator, but I took care of that!!!), probably from the time it fell off the jack!!! Fortunately, the extra clearance on both of those components doesn't appear to have affected the functionality of either of them.

So, went through all that, flushed the cooling system, and then noticed the underside of the fill cap didn't look right. That may have been all it needed.

Got myself another set of Ion rims to put on 3, as I've been wanting to do. The rims on 3 were the ones from Baby, and the tires on there were a couple years old when I swapped them on, so I've got my money's worth out of them. There's a whole story on those where they ended up costing too much, suffice it to say don't waste your money on those Goodyear mileage maximizing tires, they have such hard compound to them as to be dangerous, and I ended up getting even worse mileage with them than I'd had with a set of Chinese cheapies.

Anyway, I'd ended up getting two on the Thanksgiving weekend 40% off day, and two on the New Year's sale. Same deal as last time, I was only able to find two machined face ones, and two other painted. As you can see, one was in way worse condition!!! I was telling my dad I'd like to get the painted ones machined to match, and he made the comment, "Well, we know how to polish..." Yeah, that used to be a fair amount of my previous career. Planted the idea in my head, and I bought the discs and wheels and compound to polish, and went to work. It's too much work, but it's getting there. Still need to get an alignment from when I replaced the rod ends. Additionally, it looks like I've got one of the rear wheels on Scruffy that needs work, probably a camber kit, as it's wearing the tire back there prematurely.

And finally, that cool flat exhaust tip I made up??? The dip down to clear the emergency brake cable became the low point, and as with most lowered cars, occasionally you scrape a little. It appears it's done a bit of tweaking it up some, to where it's into the rocker panel, and it's melted it down a little. If I'm able, I'll get some aluminum tubing the same diameter and make up a metal piece with a cutout around it to give it some clearance.