I Fixed My Bumper With JB Weld and I'm Ashamed

This will actually be a bit of a random, catch up post.

Around a month ago, my mom had fallen out of bed and hurt her arm and hip. They took her to the hospital to check it out, and at first they thought she'd had a stroke or something, but that wasn't the case. I think they were just going by past history. Anyway, she'd either been dreaming or hallucinated that she was on top of a rock, and there was a missile coming at her, so she dove off. After she was out of the hospital, they moved her to a rehabilitation place.

For Mother's day, she wanted to go to Mrs. Knott's Chicken Dinner Restaurant, which is just outside Knott's Berry Farm and not far from her place. She thought she would be out on the Monday after, and that was our original plan. She wasn't out, and we pushed it back a week. She thought they were going to send a nurse with her, so we had planned on that. Turned out they weren't going to be doing that, but they wanted to send her in a wheelchair. We don't have quite enough room for that in Kutcher, so we talked Surrogate into coming as well, so we could haul the chair in Scruffy. Didn't really take that much talking into!!! I'd never been there, and I was wondering what the parking situation would be like. Found a Reddit post that said there's an hourly lot off to the left, and they validate for two additional hours. Found it as they said, pulled in, and pulled off out of the way to get my wife and mom out and set up before we went off to try and find parking spots.

While we were getting them set up, after I'd gotten my wife's walker out of the back of Kutcher and the wheelchair out of Scruffy, a spot opened up right by were we were unloading. The hatch on Kutcher was still open, and my mom's wheelchair was right behind it. I was trying to get people to move, so I could get that spot, and pulled over there with the hatch hanging open, and it somehow hooked the bumper a bit on the wheelchair. A few months ago I'd drug it a little coming out of a driveway with a bunch of people in the back, and the passengers' side will occasionally pop out a little ever since.

After we ate, we went back to her place, where she had some watches that needed the batteries replaced. While she'd been in the recovery place, my nephew Eyeball and his wife (who I haven't seen in forever) had given her a couple of coloring books and pencils, Sarcastic Jesus and Jesus on Vacation. This was the first page of Sarcastic Jesus, and Surrogate and I were losing it over it!!!

I had been meaning to take a closer look at that bumper situation ever since it became an issue. It has a series of slots that correspond to catches on the body, but the forward one was broken, and it has a screw going in from in the wheel well that seemed like it wasn't mounted solidly anymore.

Took out that screw, and pulled the bumper away, and the leading edge of the plastic that mounts to the body was broken off. I sanded it for adhesion, and saw there was a groove just below the mounting area that was around 1/8” wide and 1/2” deep, so I cut a piece of aluminum bar to place in there, then put a bunch of JB Weld on the ends of the break and the groove, and held it in place with tape until it set. Also put some on the broken part of the bumper slot, I don't know how well it'll hold, but it's better than it was.

You can see the aluminum bar on the shot with the tape removed. It's holding like it should now.

Back when I was at the fly by night plastics forming company, the machinist that was there when I came along would repair the aluminum forming tools using JB Weld, which has terrible thermal properties for doing thermoforming on. Those of us who had actual themoforming experience would use Devcon aluminum repair epoxy, which has a high content of aluminum, and has much better thermal properties, and we would mock him mercilessly for his use of JB Weld. Since I've been out of there, I use JB Weld for everything!!! Just the week before, the panel for the window switches had broke, and I also used JB Weld on it.

Unrelated, but could have been in the previous post, I picked up these electronic mosquito repellers. I was skeptical, but turns out they work great!!! They give off a high pitch tone that you can hear when you first turn 'em on, but after a minute you don't even notice it.

Another unrelated, I was ordering some items for Walmart, and they had this Dirty Mountain Dew that they said was getting down to limited amounts, so I picked up a couple packs to try it. It says cream soda, but it tastes more like the actual dew with the cream added, that they've been having at Taco Bell. Better than some (once you get past it not actually tasting like cream soda) but I don't think I'll be going out of my way for it again!!!

Kalos Calling

Last month, just a little before the younger's birthday, Pokemon GO was doing a live event near us, at the Rose Bowl. The GO Tour Kalos. Right around this time last year they'd had one, and I had been thinking of going, but by the time I looked into getting tickets, it was sold out. Since it was near the boy's birthday, I figured this would make another good present for him (and me)!!!

They had three areas, the City Center, the Coastal Research Laboratory, and Mountain Manor. This was the City Center, it had a fountain with water flowing out of the middle of a Pokeball.

There was some theming like that, and cut outs of team leaders set up around the area, but mostly the attractions were in game.

It had been raining that week, so some of the areas were a bit muddy, but it was mostly clear on that day. A really nice day to be out!!! Started out chilly (there was snow up on Mount Wilson) but warmed up as the day went on.

Most of the play area was on the surrounding golf course.

A couple of screen shots of the play area, the first showing the actual stadium...

And another on the golf course, on the other side of the river. You can see, there are a lot of gyms and stops, several of them for the event.

Did I mention the river??? It's the northern portion of the Arroyo Seco!!! Just a little north of there is the Devil's Gate reservoir, one of these days I'd like to check it out. You might be able to hike to it from where we were, but there were other activities afoot!!! I had an Ampharos as my buddy at the time, because it mega evolves, and having it as your buddy gives you more mega energy. It was a poffin day!!!

There's the cabin they had for the Mountain Manor area. When we were first there, there was a big line to go in. We had no clue what was going to be in there, so we weren't eager to get in a big line.

Later on the line was considerably shorter, and we checked it out. It was cool, but nothing that great.

The Coastal Research area had white boards and a computer terminal set up, as well as the three team color cylinders shown in an earlier picture.

Eggs in incubators, and shown on the white board here is something they were rolling out, link charges. They're used in mega raids, but I don't quite understand how they work...

And there's my Ampharos next to what appears to be a mossy lure module, it appears to be much larger than I'd pictured in person!!!

They had several things they rolled out that day, one of them was the super mega raids. You've got to have something mega evolved to get through the shields to defeat them, and the 'mon you catch after has a fourth level of mega evolution that you can achieve. We only did one super mega raid for a Gardevoir, which I didn't have the required amount of mega energy for it yet. I took this screen shot of the waiting queue for it, with 796 participants!!! It wasn't hard to do with that many, but they rolled out the Dragonite mega evolution afterwards, and we were unable to defeat the super mega raid with our normal wrecking crew of 4.

Another of the debuts on this day was the shiny Honedge. We did several raids (the pass we bought came with several passes, I'm not sure exactly how many, but we ran through them all!!!) and both got our shinies. Also pictured, one of the other things they've added recently is backgrounds (that only show in your own game, so...) and for the event, you could get some with the Los Angeles skyline as a background!!! Looks great!!!

Another one that we did a few raids of was the Yveltal, and the first one I got a shiny!!!

Caught in the wild was a shiny Pancham, and since it's kind of that color, I've renamed it Tancham!!!

Two mega evolutions were also debuted, one of them was the Malamar. I had a shiny Inkay already, but during one of the raids I caught a shiny Malamar.

The other mega evolution released was for Victreebel, another one that I already had a shiny of. I think I got another.

Another wild catch, a shiny Skiddo!!! Don't see many of the non shiny ones even, so this is pretty cool!!!

Another thing they were doing for the event, there were various stops with different trims of Furfrou that you usually can't get in our area. While you're near them, you can get the trims. I had two shiny Furfrous, and while we were there I caught two more!!! I was able to trim all the shinies with trims not normally available. One of the tasks that came with the ticket was to visit all the various trim stops, in a specific order. Hadn't picked up on that at first, so we ended up doing a little more walking than we would have!!! I applied the Kabuki trim to the first shiny Furfrou I'd caught!!!

A Look Back Recap

Here's some of what has happened recently!!!

Years ago, the boys had been sledding down into the canyon. A few weeks ago I was out doing some yard work, and a trio of neighborhood kids showed up with a sled of their own and did some of their own sledding!!! Nice to see area kids still getting up to outdoor hijinks!!! I didn't take a follow up picture of the unceremonious dismount...

Back in December the younger and I had gone down and visited my mom around Christmas. My sister and her youngest son also came down, and we all met up at the John's Incredible Pizza near where my mom lives. My wife wasn't feeling well, we'd all been off and on sick during that time. My cough came back and hung on for a month or so after, but when we were all feeling better, I wanted to go visit my mom again. Surrogate came along, as well. Haven't made mention, but the restaurant Stacked that we'd been to a few times didn't survive the stupid times, but while we've been in the area my mom lives, I've searched restaurants in the area, and turns out not far away there's another Stacked!!! Naturally, that's where we went!!!

They've done away with the “order on an Ipad” gimmick, but you can still craft your burger to order. I've mentioned that I'll almost always make one with sauteed onions and bleu cheese, and there was a burger close to that already on the menu, for less than I could have one built for, including bacon. I had to specify sauteed onions instead of the raw it came with, and added garlic aioli, and it came out great!!! I also like the building better, as well, it has the same look as the one we used to go to, but the windows towards the street are able to completely roll up for a fresh air dining experience, and the weather couldn't have been more perfect!!! Photos came up with a look back collage of our visit, and Halloween 2015!!!

I did a whole post that was mostly about how the driver's side headlight on Kutcher has always given me trouble. At that time, I had gotten a socket that was touted as high temperature. Back in January, it happened again!!! I found out that there were some places that make ceramic sockets, so I ordered one, and got it going again. Not long after that, the headlight bulb itself burned out!!! Bought a replacement bulb, and took care of it yet again... for now (Jinx!!!)

Oh yeah, there's a shot of the new battery...

A friend of mine had bought his car with LED headlight bulbs installed, and a little after I'd replaced the socket, then the bulb on Kutcher, one of his had burnt out. He asked me if I could help him out with it, and I bought him a new set of bulbs and helped him install them. His high beam bulbs were still conventional halogen bulbs, and the set I bought had replacements for both, so I told him my tax for helping him was I got to keep the bulbs that still worked. Shortly after that, the driving light on the driver's side of Kutcher went out again. The lens has a small hole cracked through it, and it had rained, and I theorize that when it rains, cold water will splash on the hot bulb and break it. Anyway, the one low beam LED bulb I'd removed matched the driving light bulb, so it's now in there!!! Of course, it has kind of a bluish cast, while all the other three lights have the yellowish halogen cast, so it's an odd one out. One of these days, I'll get those yellow driving lights installed!!!

My wife had suggested going back to Pie 'N Burger again. Apparently, it is now our just after Valentine's Day tradition!!! They've got a lot of items with chili on it on the menu, and we hadn't tried it last time, so this time I upped my fries to chili cheese fries. It was OK, but I wouldn't recommend them for their chili!!!

We split a slice of peach crumble pie for dessert. Go there for the pie!!!

I had mentioned that one of the pumps at the local Arco had caught on fire last year. They still haven't replaced the pump, or done much with the awnings. They've got the pump boxed off, and it's been tagged up,

I had made mention that the new phone holder in Kutcher had some issue rotating out of the proper position, and I'd put in on the forward part of the center console, with the arm pretty much straight up, and that had done the trick. A few weeks ago, the suction cup came off, and I'd stuck it back. It didn't stay, so I pulled it out, gave it a good cleaning, and it held for a week, then was falling off again. Time to go to the drawing board... I took the arm portion from the previous one (it has the same ball mount for the holder part) and made up a piece of plastic with a little portion that came out, that I could mount to one of the bolts holding the center console down. It worked, but it was close to the emergency brake handle so you had to pull it up with a finger or two, and the phone was almost laying flat.

It kind of worked, but really not acceptable. I bent up a steel angle that would mount to two of the center console bolts, and used the same plastic base to mount it to the upright. Fairly solid, and a lot closer to where it should be!!! I may take it back to the drawing board again, and rotate the base a little farther back. Shouldn't be difficult.

Had the younger's birthday get together last weekend. It was pretty cool, we went on a short neighborhood walk, they played on the swing across the street, and played a little basketball (horse). I didn't get many pictures, and most of the outdoor ones didn't come out good because it was dark out. Here he is in a shirt my wife got him, after he opened the cologne I got him. He's said for years that he'd like to get cologne that smells of petrichor, the smell after it rains, and I found some!!!

A few weeks ago, they did another rocket launch from Vandenberg, and somehow it left this crazy looking contrail!!!

A few weeks ago we'd gone to Goodwill again, I forget what even for, but I found another shirt!!! It was the sale of the day tag, and my size, and in an underrepresented color!!! Interesting, the DeLorean pictured is unmodified!!! I took the picture here with the cam in my computer, possibly the first time I've ever used it for a picture!!!

I had seen this new Mountain Dew flavor, Baja Cabo Citrus, a few weeks before, but didn't buy it. When I was getting supplies for the boy's birthday, I picked some up. It's pretty good, the flavor makes me think it's heavily tangerine.

Going Back Backstage

As previously mentioned, on last year's vacation, we took the Casino backstage tour again. The first time we'd taken the tour was on our 2013 vacation. Once again, here's a remix picture of the outside as a line drawing!!!

I likely could have made a post about just the tour on the previous trip, but never did. I remember our guide on that particular tour was a girl named Porsche that my wife really liked. The closest I did was the years later tale of the Chime Tower post, which I first heard on that particular tour.

As outside, so is it inside!!! A beautiful building, with fine construction. The ground floor houses the theater, which is a work of art. It is also nearly acoustically perfect, and on the tour it was mentioned that it was measured to use the same geometry for some other auditorium, possibly Carnegie Hall or maybe Radio City Music Hall.

Murals adorn the walls, and the ceiling is adorned with gold leaf.

Centered at the top of the stage is a depiction of Botticelli's Venus, our guide noted that the designer had depicted her as a redhead!!!

The construction was right around the time of the transition from silent movies to the talkies, so naturally an organ was included. It's being worked on currently.

Our tour guide had pointed out from the theater the private suite of William Wrigley Jr., but noted that he generally preferred to be out mingling with the guests. This is the view from his suite.

This was also during the big band era, and there were several posters of bands that had preformed there.

The projection room featured several generations of projectors, from arc light projectors to digital projectors. This was our tour guide, I don't remember his name, but it might have been Tom. He did a great job. The wall behind him has several people that have signed their names. Most of them, he said, you probably don't know, but prominently in the middle was the signature of Stan Lee!!!

There were displays with several vintage pictures of the area, and construction of the Casino, as well as the original structure that was there.

On the top floor, the world's largest round dance floor!!! Something new that they're doing now, they've re-purposed it as a skating rink!!! There's a spinning ordainment in the middle of the ceiling that Surrogate wanted to get underneath and take a picture of. There weren't too many people skating up there, and I told him he probably could just stride out there like he was supposed to be there, lay down and get his picture and no one would give him any trouble!!!

The tour finished up on the outside promenade. Our guide was fielding any questions, and I asked him if he was familiar with the story of the Chime Tower, and why the ramps were no longer carpeted. He wasn't, and I was able to relate the story as I had been told on our previous tour.

After the tour was over, we worked our way down to the next level where the restrooms are located. They had this nice bar area, where they had a video playing about the old days of Avalon and the Casino.

And as teased in the previous post, the selfie in the restroom mirror!!!